Crane Rail pad:
The crane rail pad is used under the crane rails.
The crane rail pad is specially designed for the soft mounting of crane rails, being mounted either continuously on steel or mixed on concrete and steel, along with the crane rail clips.
Our crane rail pad is produced with natural rubber and reinforced with a steel strip in the middle.
The crane rail pad can reduce the wear of the rail and its support, absorb the uneven surface and improve the contact between rail and support.
Our crane rail pad are supplied in the length of the 12m, other length should be advised upon request.
The most common types of this reinforced crane rail pad is MK6 and MK2.
Rail pad, or railway rubber pad, is a material available to decrease the vibration transmitted from the rails to the sleeper or sub grade. It is inserted in between the rail and base plate or sleeper. Rail pad is introduced to the railway fastening system because of its resilience or elasticity which can be implemented in the intervention of fatigue cracking of sleepers. The dynamic stress from wheel or rail impact from both regular and irregular movements is attenuated. There is added advantage of reducing track maintenance and associated costs. Other track materials such as rail joint, rail clip, rail clamp, gauge rods are available as well.
Free Quote Now!
Railway Rubber Pad Features
- High performance of damping
- Good insulation
- Strong resistant to aging and wear
- Less deformation
- Long service life
- Easy installation
YONGYANG Rail Pad Types
YONGYANG provides exceptional elastic rail pad of various types for high-speed railway, normal speed railway and cranes. Especially the rail pad made of rubber, EVA, TPEE, HDPE are very popular with customers. Our railway rubber pads fit the rails such as UIC54, UIC60, BS80lbs, BS100lbs, etc. We have more than 130set of machines in our production lines which can reach an annual production capacity of up to 2000, 000 pieces of rail pads. We offer a wide range of rail pads and other track materials at competitive prices.
- Rubber Pad
- EVA pad
- TPEE pad
- HDPE (high-density polyethylene) pad
| Raw Material |
Rubber,EVA,TPEE,HDPE |
| Standard |
UIC, AREMA, TB/T2626-95 |
| Application |
43kg/m, 50kg/m, 60kg/m, 75kg/m,115RE, UIC54, UIC60, S49 |
| Model number |
43-7-7, 43-10-7, 50-7-9, 50-10-9, 60-10-17, 60-12-17 |
| Operating temperature |
-50~70 degrees |
| Certificate |
MSDS, ROHS, REACH |
| Notes |
They should be stored in a clean, ventilated place. Don't be direct sunlight, keep away from the heat source and chemical reagent. Don't touch the oil, organic solvent and other chemicals. Banned exposure. |
Due to different production batches and specific models, the above chart is for reference only. For details, please contact our sales staff for specific verification.
Studded and Grooved Rail Pad
Studded and grooved rail pad can adapt to the increasing traction and axle loads of heavy-haul trains as the rail transit industry fast developing. High resilience is provided by flexural and shear deformation, the elastic recovery rate is fast. What's more, under the action of vertical dynamic force, the deformation seismic amplitude is large and the dynamic stiffness is low.
Studded rail pad
The studded design together with its natural or synthetic elastomer material leads to high resilience and abrasion resistance. They can also provide excellent impact attenuation, noise suppression, extended track and ballast life. Because they can adapt to higher speeds and improve passenger comfort, studded rail pads become a very common choice across the world.
Grooved rail pad
There are grooves on the upper surface of the rubber pad, which can ensure that the bottom of the rail is always in close contact with the rubber pad, reducing the wear of the rubber pad. The middle of the rubber pad is set with a steel sheet to strengthen the lateral stiffness of the rubber pad. The thickness of the steel sheet is very thin, which is easy to roll up for transportation.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}