Qt400-15 (GGG40) Qt450-10 (GGG45) Qt500-7 (GGG50) Embedded Rail Shoulder

• Customization: Available
• After-sales Service: Yes
• Warranty: Yes
• Model NO.: QT450-10 QT500-7 Embedded Rail Shoulder
• Customized: Customized
• Certification: ISO14001, ISO9001
• Type: Shoulder
• Transport Package: Cartons, Woven-Bags or Gunny-Bags in Wooden Cases
• Trademark: YONG YANG
• Origin: China
• HS Code: 8602900000
• Production Capacity: 20000PCS/Day

Product Description

Rail shoulder is cast in the concrete rail ties to fix the elastic rail clips. There are two types of rail shoulders available, the cast-in shoulder and the weld-on shoulder, both of which are used for the fixing of elastic rail clips.
The casting shoulders as the embedded part of the rail way fastening system are pressed in concrete sleeper and work together with the E clip to fasten the rail. The cast in shoulder is made by casting from iron, such as, GB/T 1348-1988, NF EN 1563(1997), ISO1038, DIN 1693, JIS G5502 (2001), KS D 4302, GOST 7293(1985) or BS EN 1563(1997).

Application	UIC54	UIC60	115RE, ,50kg rail, 60kg rail, BS80lbs, BS100lbs, ect.
Name	QT500-7	QT450-10	QT400-15
Standard	GB 1348-88	GB 1348-88	GB 1348-89
Chemical composition(%)	C:3.60-3.80	C:3.40-3.90	C:3.50-3.60
	C:3.60-3.80	Mn:0.2-0.5	Mn:≤0.5
	Si:2.50-2.90	Si:2.70-3.00	Si:3.0-3.2
	P:≤0.08	P:≤0.07	P:≤0.07
	S:≤0.025	S:≤0.03	S:≤0.02
Tensile Strength	≥500 Mpa	≥450 Mpa	≥400 Mpa
Yield Strength	≥320 Mpa	≥310 Mpa	≥250 Mpa
Elongation(%)	≥7	≥10	≥15
Hardness	170~230HB	160~210HB	130~180HB
Metallographic organization	ferrite & pearlite	graphite & ferrite & pearlite	ferrite

Rail Shoulder

 

What Types of Rail Shoulder YONGYANG Produce

The Rail shoulder is semi-embedded part cast in the concrete rail ties to fix the elastic rail clip to the base plate, There are two Common types of rail shoulders available from YONGYANG, Cast-in Shoulder and Weld-on Shoulder, both of which are used for the fixing of elastic rail clips. One is Single Stem Iron Shoulder used in pre-stressed concrete ties and the other is Twin Stem Iron Shoulder used in Bi-Block or Twin Block concrete ties.

Cast-in Rail Shoulder

The casting shoulders as the embedded part of the rail way fastening system are pressed in concrete sleeper and work together with the E clip to fasten the rail. The cast in shoulder is made by casting from iron, such as, GB/T 1348-1988, NF EN 1563(1997), ISO1038, DIN 1693, JIS G5502 (2001), KS D 4302, GOST 7293(1985) or BS EN 1563(1997).
Cast in Shoulder
Weld on Shoudler

Cast-in Rail Shoulder Mechanical Property:

Material	Tensile Strength(Mpa)	Yield Strength(Mpa)	Elongation(%)
QT400-15(GGG40)	400	250	15
QT450-10(GGG45)	450	310	10
QT500-7 (GGG50)	500	320	7

Cast-in Rail Shoulder Chemical Composition Requirement:

Material	C	Si	Mn	P	S
QT400-15	3.6-.36	3.0-3.2	0.5	0.07	0.02
Qt450-10	3.4-3.9	3.7-3.0	0.5	0.07	0.03
QT500-7	3.4-3.8	2.5-2.9	0.6	0.08	0.025

Cast-in Rail Shoulder Applications:

Material	Application
QT400-15(GGG40)	115RE, ,50kg rail, 60kg rail,BS80lbs, BS100lbs, ect.
QT450-10(GGG45)	UIC60
QT500-7 (GGG50)	UIC54

Weld-on Rail Shoulder

The weld-on shoulder is used at the typical position of rail where the rail shoulder is weld on flat steel plate rather than the standard tie plate. The weld-on shoulder production method is hot forging, it is fabricated according to AREA standard. The steel material type for weld-on shoulders production can be low or medium carbon steel, which varies with your specific requirements.
For the record: The rail cast iron shoulders can be welded on to longer length steel sleeper sections or bearers, for locations where fabrication of switch and crossing layouts where vertical rail geometry is employed. The railway shoulder's ability to be welded in the specific position as dictated by the layout design, this makes it particularly useful and cost effective in this case.